Table of Contents
Advertisement
Chapter 2
UNPACK AND INSPECT
Contents of ADTRAN Shipment
INSTALLING THE IMUX-56/64 MODULE
61200262L1-1A
Installation
Carefully inspect the IMUX-56/64 Module for shipping damages. If damage
is suspected, file a claim immediately with the carrier and then contact
ADTRAN Technical Support. If possible, keep the original shipping
container for use in returning the IMUX-56/64 Module for repair or for
verification of shipping damage.
The following items are included in the ADTRAN shipment:
•
IMUX-56/64 Module
•
IMUX-56/64 Module User Manual (insert into main ATLAS User Manual)
The installation procedure is described below, and Figure 2-1 shows the
proper placement of the option module.
Instructions for Installing the IMUX-56/64 Module
Step
Remove the cover plate (corresponding to the slot into which the
1
IMUX-56/64 Module will be installed) from the ATLAS chassis
rear panel.
Slide the IMUX-56/64 Module into the ATLAS chassis until the
2
module is positioned firmly against the front of the ATLAS unit.
3
Fasten the thumbscrews at both edges of the option module.
Complete installation of remaining modules and Base Unit as
4
specified in the Installation chapter of the ATLAS User Manual .
IMUX-56/64 Module User Manual
Action
2-1
Advertisement
Table of Contents
