Vg-2 And Spectre 1 Alert Settings; Radar Alert Settings; Detection; Signals Detected - Cobra XRS 9340 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

VG-2 and Spectre 1 Alert Settings

Assistance
The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
Secondary Icons
The factory setting is VG-2 and Spectre 1 alert Off.
On/Off Indicator
X K Ka V S c
Dim Button
Press and hold
Notice
for two seconds
To Turn VG-2 and Spectre 1 Alerts On and Off
While no signal is being
Tone

Visual Display

detected, press and
On = Two beeps V will blink twice in the display
hold the Dim button
for four seconds.
Off = One beep V will blink once in the display

Radar Alert Settings

The detector allows you to choose whether it will show alerts on the X, K,
and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal is
Tone Visual Display
being detected, press
X On = Two beeps X will blink twice in the display
and hold both the Dim
and Mute buttons for
X Off = One beep
X will blink once in the display
four seconds.
To Turn K Band On and Off
While no signal is
Tone Visual Display
being detected, press
K On = Two beeps K will blink twice in the display
and hold both the
Mute and City buttons
K Off = One beep K will blink once in the display
for four seconds.
To Turn Ku Band On and Off
While no signal is being Tone Visual Display
detected, press and
Ku On = Two beeps X and K will blink twice in the display
hold the City button
for four seconds.
Ku Off = One beep X and K will blink once in the display
12 English

Detection

Your Detector
Intro Operation Customer Warranty
Detection
Assistance

Signals Detected

The tables on the following pages show you the types of Signals your
detector will detect, as well as the visual alerts it provides for each of them.
Secondary Icons

Audio Alerts

A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
radar signals, the tones will repeat faster as you approach the signal
source. The repeat rate of the tones gives you useful information about
Notice
the signal detected. (See responding to alerts on page 16.)
Visual Display
An indication of the type of signal detected will appear in the UltraBright
data Display. During X, K, Ka and Ku alerts, a number will also appear,
indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
X Signal Detected K Signal Detected Ka Signal Detected
2 3
X K Ka V S X K Ka V S X K Ka V S
L
During laser alerts the letter will appear, instead of the signal strength indication.
Laser Signal Detected
L
X K Ka V S
During VG-2 or Spectre 1 alerts, the letter V will appear. It will be steady
during VG-2 and blink during Spectre 1.
VG-2 Alert Signal Detected Spectre 1 Alert Signal Detected
X K Ka V S c X K Ka V S c
During Safety Alert and Strobe Alert the letter S will appear. It will be
steady during a Safety Alert and will blink during a Strobe Alert.
Safety Alert Signal Detected Strobe Alert Signal Detected
X K Ka V S c X K Ka V S c
Nothing Comes Close to a Cobra
•
Ku Signal Detected
5 4
X K Ka V S
® 13