Voice/Tone Setting; Spectre 1 And Vg-2 Alert Audio Settings - Cobra Pro 9580 Operating Instructions Manual

Settings
Your Detector

Voice/Tone Setting

You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
Mute Button
Press and hold for
two (2) seconds
To Change From Voice Alert To Tone Alert
While no signal
Tone
is being detected,
One (1) beep
press and hold
the Mute button for
two (2) seconds.
To Change From Tone Alert Back To Voice Alert
While no signal
Tone
is being detected,
None
press and hold
the Mute button
for two (2)
seconds again.
12 English
Voice
Visual Display
Tone Alert None
Voice Visual Display
Voice Alert None
Settings
Your Detector

Spectre 1 And VG-2 Alert Audio Settings

The detector is undetectable by police Spectre 1 and VG-2 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show Spectre 1 and VG-2 alerts.
The factory setting is Spectre 1 and VG-2 alert On.
Spectre 1 And VG-2 Off Spectre 1 And VG-2 On
Spectre1 Spectre1
& VG2 & VG2
Off On
Dim Button
Press and hold for
two (2) seconds
To Turn Spectre 1 And VG-2Alerts Off
While no signal
Tone
is being detected,
One (1) beep
press and hold
the Dim button for
two (2) seconds.
To Turn Spectre 1 And VG-2 Alerts On
While no signal
Tone
is being detected,
Two (2) beeps
press and hold
the Dim button for
two (2) seconds.
Voice
Visual Display
Spectre Spectre1
& VG 2
VG-2 Off
Off
Voice Visual Display
Spectre1
Spectre
& VG 2
VG-2 On
On
Nothing comes close to a Cobra ® 13