Poly V-Belts For Ancillaries: Renewing; Poly V-Belts For Ancillaries And All Pulleys: Renewing; Instrument Cluster: Resetting Driver Information System - Audi A8 2010 Maintenance Manual

Audi A8 2010 ➤
Maintenance - Edition 11.2014
3.64

Poly V-belts for ancillaries: renewing

Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ ; Rep. gr. 13 ; Cylinder block (pulley
end); Removing and installing poly V-belt .
3.65 Poly V-belts for ancillaries and all pul‐
leys: renewing
Procedure:
– Renew poly V-belt for ancillaries according to specifications in
Workshop Manual ⇒ ; Rep. gr. 13 ; Cylinder block (pulley
end); Removing and installing poly V-belt .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Renew pulleys according to Workshop Manual ⇒ ; Rep. gr.
with respect to the correctness of information in this document. Copyright by AUDI AG.
13 ; Cylinder block (pulley end); Exploded view - cylinder block
(pulley end) .
3.66 Instrument cluster: resetting driver infor‐
mation system
Procedure:
– Reset single journey memory and total journey memory of
driver information system; refer to vehicle Owner's Manual.
138
3. Maintenance