Linksys EFSP42 User Manual page 13

5. When the Properties window appears, choose the Details tab. Click on
the Add Port button.
The Add Port window will appear, shown below.
7. In the Add Port window, select Other and then PrintServer under the list-
ed ports to add.
20
Instant EtherFast ® Series EtherFast 10/100 PrintServers
8. Click OK. The Configure PrintServer window appears, shown below.
9. Enter the IP address or the Default Name of the PrintServer in the Device
Name field. If you are not sure what the number is, click on Browse and
choose from the list that appears, or see page 10.
It may take a few seconds for the list to appear. If you have multiple
PrintServers on your network, be sure to pick the correct name.
10. Click on the Select Device Port button.
21