Getting Started
Your Detector
IntelliShield Highway/City Modes
Your detector is equipped with IntelliShield false signal rejection technology
which consists of a Highway mode and three different levels of City modes:
City X, City X Beep Off and City X+K.
Highway mode provides full response to all signals detected. The City modes
reduce false alerts while you are driving in or near urban areas where there
are many sources for conflicting X or K band signals such as microwave
towers and automatic door openers. The factory setting is Highway. The
factory City mode default setting is City X; it can be changed in Menu mode
(see page 13).
You can toggle between Highway and City modes by pressing the City
NOTE
When you change to City mode, the unit will enter whichever city
default mode is set at the time.
Muting an Alert
Your detector allows you to quickly turn Off an Audio Alert by momentarily
pressing the Mute
during the alert, the Audio Alert will be turned back On. After the current alert
is gone, the next alert will be heard.
Two other features are incorporated in your detector to automatically mute
or reduce the audio volume of alerts. See pages 17 and 18 for Intellimute
and Auto Mute modes.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
button. If you press the Mute
button a second time
Nothing Comes Close to a Cobra
•
button.
•
•
®
11