■ How to set the time difference ( ④ - ⑥ )
After the system is reset, the time difference is set to London/UTC.
After the system is reset, the time difference is set to London/UTC.
※ If necessary, set the time difference.
※ If necessary, set the time difference.
Continue to press the button (for 8 seconds)
4
and then release it when the second hand
starts to move counterclockwise.
The watch switches to the time difference adjustment mode.
※ P ress the button
with a pointed
object. → P.94
Press
the button for
8 seconds and
then release
it
※ A lthough the second hand may move to the zero second position 3
7
seconds after pressing the button, keep pressing it.
※ W hen a no movement state of the second hand is kept for one minute
or more, the watch automatically switches to the time display mode.
W hen the watch switches to the time display mode, re-attempt
operation from ④ .
156
Specifications
1. B asic functions: basic watch with 3 hands (hour, minute and second hands)
2. F requency of crystal oscillator: 32,768Hz (Hz= Hertz, cycles per second)
3. L oss/gain (per month): Loss/gain ±15 seconds in a monthly rate (except the cases
when the watch is used without time adjustment by receiving a radio signal and when
it is worn on the wrist within a normal temperature range between 5℃ and 35℃)
4. O perational temperature range: Between −10℃ and +60℃
5. D riving system: Step motor type (hour, minute and second hands)
6. P ower source: special secondary battery, 1 piece
7. D uration of operation: approximately 6 months (when the battery is fully charged
and the power save is not activated)
※ A pproximately one year and a half at maximum when the power save is activated
after the battery is fully charged).
8. R adio signal reception function / radio signal transmitting station: Japan (2
stations), China, U.S.A. and Germany.
Automatic reception (before 2:00 a.m. and 4:00 a.m.)
※It varies depending on the radio signal receiving condition.
※ A fter radio signal reception, the watch will start to work depending on the quartz
movement until the next reception.
※ M anual reception is available.
9. I ntegrated circuit: oscillator, frequency divider, drive and reception circuit: IC, 2 pieces
8
※The specifications are subject to change without notice due to product improvements.
158
Press the button to set the time difference
5
of the area where the watch is used
W hen the button is pressed once, the second hand moves by
one second (+1 hour) clockwise to advance the time by one hour.
The position of the second hand indicates
a time difference. Refer to the figures at
the right to set the time difference.
Each pressing of the button
moves the second hand by
one second (+1 hour).
Press
the button
※ A lso while the watch is working, the
second hand can be moved.
The radio signal transmitting station is changed by setting the time
difference.
When setting the time difference for a region other than the radio signal
reception ranges, the radio signal reception function will not work.
In Japan
In China
Set the second hand to
Set the second hand to
the 9 second position.
the 8 second position.
In the other countries
List of major time differences around the world P. 1 18
※ W hen setting the daylight saving time (DST), add one hour
to the time difference of a desired area.
※ B y pressing the button when the second hand points to the
13 second position (+13 hours from UTC), the second hand
moves to the 49 second position (−11 hours from UTC).
■ Set the time
Receive a radio signal
6
to set the time
When the operations ① - ⑤ are finished,
make sure to set the time.
How to conduct manual
reception P.138
Set the time and date manually
in an environment in which a
radio signal cannot be received.
→ How to manually set the time p.141
7
When the time are set, the
operations are finished.
157