At trouble
At trouble
The crown or buttons
The crown or buttons
cannot be operated.
cannot be operated.
Operation
Operation
You get lost in
You get lost in
the middle of the
the middle of the
operation.
operation.
Blur on the dial glass
Blur on the dial glass
Others
Others
persists.
persists.
※ F or the solution of troubles other than the above, consult the retailer from whom the watch was purchased.
7
152
In case of an abnormal movement
In case that the watch moves
abnormally or that the watch
does not move at one-second
i n t e r v a l s e v e n a f t e r f u l l y
charging the battery, perform
the procedures from ① - ⑥ for
normal function.
7
154
Possible cause
Possible cause
The stored electric power is running short.
The stored electric power is running short.
Hands and date are moving right after a setting
Hands and date are moving right after a setting
is carried out by the crown or button operation.
is carried out by the crown or button operation.
−−−−−−−−−−−−−−−−−−−−−−−−
−−−−−−−−−−−−−−−−−−−−−−−−
Small amount of water has got inside the watch
Small amount of water has got inside the watch
due to deterioration of the gasket, etc.
due to deterioration of the gasket, etc.
■ Reset the system ( ① - ③ )
Pull the crown to the second
1
click
※ W hen the crown is
a screw lock type,
unlock it. → P.95
Pulling
0 1
the crown to
the second
click
※ E ven after pulling the crown, the second
hand continues to move.
Solution
Solution
Sufficiently charge the watch until it starts moving at one-second
Sufficiently charge the watch until it starts moving at one-second
intervals.
intervals.
Wait without doing anything.
Wait without doing anything.
After the date stops, the crown and buttons can be operated.
After the date stops, the crown and buttons can be operated.
1. If the crown is pulled out, push it back in.
1. If the crown is pulled out, push it back in.
2. T he watch will resume its normal one-second interval movements within 5 minutes.
2. T he watch will resume its normal one-second interval movements within 5 minutes.
3. S tart the setting procedure from the beginning.
3. S tart the setting procedure from the beginning.
Contact the retailer from whom the watch was purchased.
Contact the retailer from whom the watch was purchased.
Press the button for 5 seconds
2
and then release it
I n five seconds after releasing the button, the hour hand
starts to move and stops at the 12 o'clock position. And
then the minute hand and the second hand start to move
and stop at the zero second position.
※ P ress the
Pressing
button with a
the button for
5 seconds and
pointed object.
release
→ P.94
※ T he button cannot be operated until all the hands stop.
Reference pages
Reference pages
P.110
P.110
−
−
−
−
−
−
7
153
Push the crown
3
back in
Pushing
0
the crown
back in
7
Continue to the next page
155