When A Radio Signal Cannot Be Received; How To Manually Set The Time - Seiko SSQV038 Manual

When a radio signal cannot be received
When a radio signal cannot be received, refer to the following pages:
・Not receivable within the radio signal reception range
Check that the time difference of the area where the watch is used is set.
Although the time difference is correctly selected, the time are misaligned.
→ At trouble: Reception of a radio signal P.148
Since a radio signal cannot be received, the time became misaligned. In this case,
set the time manually.
→ How to manually set the time P.141
※ For the radio signal reception ranges, refer to Radio signal reception range indication P.100.
・When the watch is used outside the radio signal reception range
Select the time difference of the area where the watch is used.
→ Setting the time difference (selecting a radio signal transmitting station) P.116
Although the time difference is correctly selected, the time are not correct. In this
7
case, set the time manually.
140
P ress t he but t on and
2
then release it
T he second hand moves to the zero second position
and stops.
The watch switches to the manual time setting mode.
※ P ress the button
with a pointed
object. → P.94
Press
the button
and then
release it
※ W hen this condition is kept for one minute or more,
7
the watch automatically switches to the time
display mode. When the watch switches to the
time display mode, re-attempt operation from ① .
※ W hen the watch switches to the manual time
setting mode, the reception result data is lost.
Therefore, the reception result is indicated as N.
142
Press the button to set the
3
time
B y pressing the button once, the second hand makes a full
rotation and the watch advances the time by one minute.
When the
button is kept
pressed for
two seconds,
the second
Pressing
hand starts to
the button once
move. When
advances the
the button is
time by one
pressed again,
minute.
the second
hand stops.
※ The hands do not move by turning the crown.
※ A dvance the hand to set the time. The hand
cannot be turned reversely.
※ The date is changed at 0:00 a.m. (12:00 a.m.).
Pay attention to a.m. and p.m. to set the time.
※ The date cannot be set in this operation.
→ How to manually set the date P.144
■ H ow to manually set the time
If the watch is continually used in an
environment in which a radio signal
cannot be received (a region other
than the radio signal reception
ranges, etc.), set the time manually.
→ R adio signal reception range
indication P.100
・ W hen the watch is used in an environment
in which a radio signal can be received
again, receive a radio signal to set the time.
→ A utomatic reception and manual
reception P.99
※ E ven if a radio signal cannot be received, the
watch can be used with the same accuracy as
that of a normal quartz watch. (Average gain/
loss ±15 seconds per month)
※ W hen a radio signal is received after the
time is manually set, the received time is
displayed.
After the operation ③ pull the
4
crown to the second click.
Pulling
0 1
the crown
to the second
click
Pull the crown to the second
1
click and push it back in.
The second hand stops.
When pulling the crown, do not stop at the first click but pull it
to the second click immediately. If the second hand does not
stop when pushing the crown back in, re-attempt operation ① .
Pull the
crown to the
0 1
second click
and push it
back in.
※ W hen the crown is a screw
lock type, unlock it. → P.95
※ W hen a no movement state of the second hand is
kept for one minute or more, the watch automatically
switches to the time display mode. When the watch
switches to the time display mode, re-attempt operation.
Continue to the next page
Push the crown back in
5
according to the time signal, etc.
The operation is completed.
The watch starts to work.
Pushing
0
the crown
back in
※ W hen the crown is
a screw lock type,
lock it. → P.95
When the watch is used in an environment in which
a radio signal can be received again, receive a radio
signal to set the time.
→ Automatic reception and manual reception P.99
7
141
7
143