XD5125 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Using an incorrect fuse could damage the radio. The XD5125 uses one 5 amp AGC fuse (Battery) and one 0.5 amp AGC fuse (Ignition) located in-line. * Caution - Do not attach any speaker leads to ground as severe damage will occur.
Release Tuning Volume Up Mode Mute Audio Eject Auxiliary Input Band XD5125 OPERATION Control Locations Display Track Up Track Down Mono/Stereo/CD Intro Local/Distance/CD Repeat Loudness/CD Random Play/Pause Volume Down Power...
XD5125 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Power On/Off Press POWER to turn the unit on. Inserting a CD will turn the unit on automatically.
Page 7
XD5125 OPERATION General Operation Set the Clock Press and hold DISP until the clock begins to flash, then release. Press TRACK to adjust the hours and TRACK to adjust the minutes. Press DISP momentarily to save the selected time. Preset EQ Curves Press EQ to select between POP, CLASSIC, ROCK and OFF (default) equalization curves.
XD5125 OPERATION Tuner Operation Tuning Turn the rotary encoder to tune the unit up or down and select the desired station. FM Mono/Stereo Press MONO during FM tuner operation to select mono or stereo (default) reception of the broadcast signal. Local/Distance Press LOC during FM tuner operation to activate local tuning for strong station reception only.
Some CD-Rs and CD-RWs may be incompatible with Compatibility this unit, depending on media type and recording method. XD5125 OPERATION CD Player Operation to skip to the beginning of the next to return to the beginning of / II to temporarily stop CD playback.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz) Power Output: 5 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) XD5125 OPERATION Specifications 20Hz-20kHz >50dB 1 Bit 87.5MHz-107.9MHz...