Samsung Odyssey G7 LC27G7 T Series Service Manual page 24

Calibration execution method
1. Open the Setup file, then run Color Calibration
Service, then enter your ID and PW.
ID : samsungsvc
PW : svc3366
2. Connect the RS-232 port of the PC and the service
jack of the product to the cable.
- You must connect the USB high-speed charging
terminal to the Service Jack. (No DP / HDMI signal
connection)
3. Connect Samsung Electronics Service Image Quality
Measurement (I1 Display Pro) to USB of PC.
- In SW, the instrument connection information is
automatically recognized.
4. Attach the image quality meter to the center of the
monitor screen.
Product specifications
2-15