Table of Contents
Advertisement
Problem
The display shows an error
code that is not in this table.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING! Refer to Safety chapters.
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Keep a distance of about 1 cm
between the appliance and the back
wall to make sure that the lid opens.
For minimal distances for fitting check the table.
Possible cause
There is an electrical fault.
We recommend that you write the data here:
Deactivate the oven with the
house fuse or the safety switch
in the fuse box and activate it
again.
If the display shows the error
code again, contact the Cus-
tomer Care Department.
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
.........................................
A
D
Minimum distances
Dimension
A
B
C
D
Remedy
B
C
D
mm
400
650
150
20
21
Advertisement
Table of Contents
