Setting The Beeper, Vibrate, Key Sound - Accu-Chek Aviva Expert Standard Owner’s Booklet

5.11 Setting the Beeper, Vibrate, Key Sound

You can set up the meter for sound mode and/or vibration mode. The meter features different sound
(beeper) tones. Sounds may occur for:
• Button presses
• Errors
• Warnings
• Reminders
i
NOTES:
• Beeper and vibrate cannot both be turned off at the same time.
• When Key Sound is on, the meter beeps each time a button is pressed.
• Even when the beeper is turned off, the meter still beeps when an error message occurs.
• When in the low battery condition, the meter uses the medium beeper level (if the beeper level is
set to high) and disables vibrate. In the low battery condition, the main menu screen will continue
to display the icons for vibration and beeper, unless you have set them to Off. After the batteries are
replaced with new ones, the meter returns to the beeper/vibrate settings you have set.
45702_std.indb 179
5
179
10/29/09 1:42:42 PM