Setting The Beeper On Or Off - Accu-Chek Performa User Manual

Setup

Setting the Beeper on or oFF

NoTe
The beeper prompts you:
•.to.apply.blood.or.control.solution.to.the.test.strip.
•.when.enough.blood.or.control.solution.is.drawn.into.the.test.strip.
•.when.the.blood.glucose.or.control.test.is.complete.
•.when.a.button.is.pressed.
•.when.it.is.time.to.perform.a.test.(if.you.set.the.test.reminders.or.post-meal.test.reminder).
•.if.an.error.occurred.while.performing.a.blood.glucose.or.control.test.(even.if.the.beeper.is.off,.it.still.
beeps.for.an.error).
1
Press.and.release. .to. Press.and.release. .
turn.the.meter.on.
repeatedly.until.the.
flashing.beeper.symbol.
The.flashing.test.strip.
and.on.or.oFF.appear.on.
symbol.appears.on.the.
the.display.
display.
Press.and.hold. .until.
set-up.appears.on.the.
display.
51746_07022590001.indb 21
Meter Memory, Setup, and Data Transfer
2 3
Press.and.release. .or.
.to.switch.between.on.
and.oFF.
To.set.up.more.options,.
press.and.release. .
To.exit,.press.and.hold. .
until.the.flashing.test.strip.
symbol.appears.on.the.
display.
3
21
7/11/13 1:27 PM