Download Print this page

Minimum Requirements - Linksys SGE2010P Product Data

Ethernet switch with 48-port 10/100/1000 and 4 shared sfp slots

Advertisement

User/Network port-
level security via 802.1x
authentication and MAC-
based filtering
Increased bandwidth and
added link redundancy with
Link Aggregation Control
Protocol (LACP)
Enhanced rate-limiting
capabilities, including back
pressure and multicast,
broadcast, and flood control
Port mirroring for noninvasive
monitoring of switch traffic
Jumbo Frame support up to
10KB
SNMP v1, v2c, v3 and RMON
support
Fully rack-mountable using
included rack-mounting
hardware
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail:
sales@linksys.com
Web:
www.linksys.com
Linksys products are available in more
than 50 countries, supported by
12 Linksys Regional Offices throughout
the world. For a complete list of local
Linksys Sales and Technical Support
contacts, visit our worldwide website
at www.linksys.com
PRODUCT DATA
BUSINESS SERIES
Availability
Link Aggregation
Storm Control
DOS prevention
Spanning Tree
IGMP (version 1 and 2)
Snooping
Power Redundancy
Quality of Service
Priority Levels
Scheduling
Class of Service
Rate Limiting
Statistics
Standards
Environmental
Dimensions
Weight
Power
Certification
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
Package Contents
One SGE2010 Ethernet Switch
One AC power adapter with power cord
Two rack-mounting kits with 8 screws
One CD-ROM with user documentation (PDF) included
One registration card
Console cable

Minimum Requirements

Web browser—Mozilla Firefox version 1.5 or later; Microsoft Internet Explorer version 5.5 or later
Cat5 Ethernet Network Cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X)
installed on each computer in the network
Provider support for CPE software version 1.2 or higher
Check the product package and contents for specific features supported. Specifications are subject to change without notice.
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their
respective holders.
80052010A-LB
Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Broadcast, multicast and unknown unicast
DOS attack prevention
IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree,
IEEE 802.1s Multiple Spanning Tree, and fast linkover
Limits bandwidth-intensive multicast traffic to only the requestors and
supports 256 multicast groups
Connection to RPS unit for power redundancy
4 hardware queues
Priority queuing and weighted round robin (WRR)
Port-based; 802.1p VLAN priority-based; IPv4/v6 IP Precedence/TOS/DSCP-
based; Diffserv; Classification and Re-marking ACLs
Ingress policer; egress rate control; per VLAN
16 meters
802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet,
802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet,
802.3x Flow Control, 802.3ad; 802.1D STP, 802.1Q/p VLAN,
802.1w Rapid STP, 802.1s Multiple STP, 802.1x Port Access Authentication
17.32" x 14.70" x 1.73" (440 x 375 x 44 mm)
10.89 lb (4.94 kg)
100-240V 47-63Hz, Internal, Universal; also equipped with external
redundant power supply connector for external power supply, -48VDC
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47)
32 to 104°F (0 to 40°C)
-4 to 158°F (-20 to 70°C)
10 to 90%, relative, non-condensing
10 to 95%, relative, non-condensing
SGE2010
Model:

Advertisement

loading