Table of Contents
Advertisement
10/100/1000 4-Port VPN Router
Auto Negotiation: If enabled, the WAN port will be set as auto negotiated, which will automatically manage
speed and throughput. Auto-negotiation is not supported with the SFP interface. The speed will be always
100Mbps, and users have to configure the Duplex.
Click the Save Settings button to save the Port settings or click the Cancel Changes button to undo your
changes.
Port Management Tab - Port Status
Users can choose the port number from the pull down menu to see the status of the selected port.
The Summary table will show the settings for the selected port, such as Type, Link Status (up or down), Port
Activity (Enabled or Disabled), Priority (High or Normal), Speed Status (10Mbps, 100Mbps, or 1000Mbps), Duplex
Status (Half or Full), Auto negotiation (Enabled or Disabled).
Click the Refresh button to refresh the port status.
Chapter 5: Setting Up and Configuring the Router
Port Management Tab - Port Status
Half-Duplex: data transmission that can occur in two
directions over a single line, but only one direction at a time.
Figure 5-32: Port Management Tab - Port Status
33
Advertisement
Table of Contents
