Setup Tab - Advanced Routing; Figure 5-19: Setup Tab - Advanced Routing - Linksys RV0041 User Manual

10/100/1000 4-Port VPN Router

Setup Tab - Advanced Routing

Dynamic Routing
The Router's dynamic routing feature can be used to automatically adjust to physical changes in the network's
layout. The Router uses the dynamic RIP protocol, which is a networking protocol to manage network
communications or communications between networks. It determines the route that the network packets take
based on the fewest number of hops between the source and the destination. The RIP protocol regularly
broadcasts routing information to other routers on the network.
Working Mode: Select Gateway mode if the Router is hosting your network's connection to the Internet. Select
Router mode if the Router exists on a network with other routers, including a separate network gateway that
handles the Internet connection. When this Router is in Router Mode, you must have another router function as
the gateway in order for any computer connected to the Router to be able to connect to the Internet.
RIP (Routing Information Protocol): The Router, using the RIP protocol, calculates the most efficient route for the
network's data packets to travel between the source and the destination, based upon the shortest paths.
Receive RIP versions: Choose the protocol for receiving data from the network. (None, RIPv1, RIPv2, Both RIPv1

Figure 5-19: Setup Tab - Advanced Routing

and v2).
Transmit RIP versions: Choose the protocol for transmitting data on the network. (None, RIPv1,
RIPv2-Broadcast, RIPv2-Multicast)
Chapter 5: Setting Up and Configuring the Router 25
Setup Tab - Advanced Routing