Session Command; Performance Read Cache Commands; Storage Subsystem Commands - IBM System Storage DS3000 Programming Manual

Session Command

"Set Session" on page 3-234

Performance Read Cache commands

"Add drives to Performance Read Cache" on page 3-41
"Change Performance Read Cache application type" on page 3-46
"Create SSD cache" on page 3-103
"Delete Performance Read Cache" on page 3-118
"Enable or disable Performance Read Cache for a volume" on page 3-133
"Remove drives from Performance Read Cache" on page 3-149
"Rename Performance Read Cache" on page 3-155
"Resume Performance Read Cache" on page 3-167
"Show Performance Read Cache" on page 3-266
"Start Performance Read Cache performance modeling" on page 3-303
"Stop Performance Read Cache performance modeling" on page 3-314
"Suspend Performance Read Cache" on page 3-319

Storage Subsystem Commands

"Activate Storage Subsystem Firmware" on page 3-39
"Autoconfigure Storage Subsystem" on page 3-42
"Autoconfigure Storage Subsystem Hot Spares" on page 3-45
"Clear Storage Subsystem Configuration" on page 3-52
"Clear Storage Subsystem Event Log" on page 3-54
"Clear Storage Subsystem Firmware Pending Area" on page 3-54
"Clear Storage Subsystem Recovery Mode" on page 3-54
"Create Storage Subsystem Security Key" on page 3-104
"Disable External Security Key Management" on page 3-122
"Disable Storage Subsystem Feature" on page 3-123
"Download Storage Subsystem Drive Firmware" on page 3-128
"Download Storage Subsystem Firmware/NVSRAM" on page 3-129
3-332
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide