Display Automatic Support Bundle Collection Configuration - IBM System Storage DS3000 Programming Manual

In certain versions of the controller firmware, the form for this attribute value is a combination of the
alphabetical term merged with the numerical value, as shown by this example: storagePartition256
v driveSlotLimit or driveSlotLimit[16|24|32|48|60|64|72|96|112|10|128|136|144|180|192|256|
272|300|360|384|448|480|Max]
In certain versions of the controller firmware, the form for this attribute value is a combination of the
alphabetical term merged with the numerical value, as shown by this example: driveSlotLimit360
v ExternalKeyMgr (safeStoreExternalKeyMgr)
v T10PI
v SSDSupport
v highPerformanceTier
v raid6
v FlashCopy or FlashCopy[2|4|8|16]
The form for this attribute value is a combination of the alphabetical term merged with the numerical
value, as shown by this example: flashcopy16
Note: This attribute is for enabling the FlashCopy feature only.
v remoteMirror or remoteMirror [8|16|32|64|128]
In certain versions of the controller firmware, the form for this attribute value is a combination of the
alphabetical term merged with the numerical value, as shown by this example: remoteMirror128
Parameter
None
Notes
If you specify the remoteMirror parameter, this command disables the Enhanced Remote Mirroring
premium feature and takes away the structure of the mirror repository logical drive.
If you disable the High Performance Tier feature, all of the included features are disabled.

Display Automatic Support Bundle Collection Configuration

This command displays the automatic support bundle collection settings.
Syntax
Attention: The SM CLI support bundle commands must be run from the SM CLI command line
interface only. They cannot be run from the storage subsystem SM CLI script window. In addition, the
storage subsystem IP addresses are not required. Also, the -c parameter is not required to precede the SM
CLI support bundle command.
-supportBundle auto show
program path
SMcliadd program path
SMcli
Parameters
None
3-124
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide