7. Select
the
Tunnel
Setting tab, shown in
Figure C-16, and click
The tunnel endpoint is
specified by this IP
Address radio button.
Then, enter the Router's
WAN IP Address.
8. Select the Connection
Type tab, as shown in
Figure C-17, and click
All network connec-
tions. Then, click the OK
or Close button to finish
this rule.
86
Instant Broadband
Series
®
Figure C-16
Figure C-17
EtherFast
Cable/DSL VPN Router with 4-Port 10/100 Switch
®
Tunnel 2: router->win
9. In the new policy's
properties
screen,
shown in Figure C-18,
make sure that "win ->
router" is select and
deselect the Use Add
Wizard check box.
Then, click the Add
button to create the
second IP filter.
10. Go to the IP Filter List
tab, and click the filter
list
router->win,
as
shown in Figure C-19
Figure C-18
Figure C-19
87