Chapter 6: The Cable/Dsl Vpn Router's Web-Based Utility; Logging Into The Web-Based Utility - Linksys BEFVP41 User Manual

5. If you haven't already done so, click the Apply button and then the
Continue button to save your Setup settings. Close the web browser.
6. Reset the power on your cable or DSL modem.
7. Restart your computers so that they can obtain the Router's new settings.
If you need advanced setting information, please refer to "Chapter 6: The
Cable/DSL VPN Router's Web-based Utility" or the Linksys support web-
site at support.linksys.com.
Congratulations! You've suc-
cessfully configured the
Router. Test the setup by
opening your web browser from any computer and entering
www.linksys.com/registration, as shown in Figure 5-9.
If you are unable to reach our website, you may want to review what you
did in this section or refer to "Appendix A: Troubleshooting."
Proceed to "Chapter 6: The Cable/DSL VPN Router's Web-based Utility"
for more details and advanced settings information.
18
Instant Broadband Series
®
Figure 5-9
EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
®
Chapter 6: The Cable/DSL VPN
Router's Web-based Utility

Logging into the Web-Based Utility

The VPN Router uses a web-based interface to administer the Router. The
interface can be accessed via Microsoft Internet Explorer or Netscape through
use of a computer connected with a network cable to the Router.
To access the web-based interface of the Router, launch Internet Explorer or
Netscape, and enter the Router's
default IP address, 192.168.1.1
into the Address field, as shown
in Figure 6-1. Then, press
Enter.
After entering the address value into the web browser, a password request page
will pop up. Leave the User Name field empty, and type admin into the
Password field. (See Figure 6-2.) Then, click the OK button.
Figure 6-2
In this section, you'll find brief descriptions of each webpage in the Utility and
each page's key functions.
To apply any of the settings you change on a page, click the Apply button, and
then click the Continue button. To cancel any values you've entered on any
page, click the Cancel button.
Figure 6-1
19