Linksys BEFVP41 User Manual page 44

5. If you want to enter a description for your filter, click the Description tab
and enter the description there.
6. Click the OK button. Then, click the OK (for Windows XP) or Close (for
Windows 2000) button on the IP Filter List window.
Filter List 2: router=>win
7. The New Rule Properties screen will appear, as shown in Figure C-6. Select
the IP Filter List tab, and make sure that win -> router is highlighted.
Then, click the Add button.
80
Instant Broadband
Figure C-6
Series EtherFast
®
8. The IP Filter List screen should appear, as shown in Figure C-7. Enter an
appropriate name, such as router->win for the filter list, and de-select the
Use Add Wizard check box. Click the Add button.
9. The Filters Properties
screen will appear, as
shown in Figure C-8.
Select the Addressing
tab.
address field, select A
specific IP Subnet, and
enter the IP Address:
192.168.1.0 and Subnet
mask:
(Enter your new values if
you have changed the
default settings.) In the
Destination
field, select My IP
Address.
Cable/DSL VPN Router with 4-Port 10/100 Switch
®
Figure C-7
In the Source
255.255.255.0.
address
Figure C-8
81