Panasonic NR-CW530H Operating Instructions Manual page 40

※ For CW530H models
When using for the first time or when not being used after a long time, the Ice tray and Ice box
may smell unpleasantly or collect dust. Remember to clean the Ice tray and Ice box before
start to make ice.
※ For CW530J models (Auto Ice and Water Dispenser)
When using for the first time or when not being used after a long time, the Ice tray and Ice box
may smell unpleasantly or collect dust. Remember to process to clean the Ice maker before
start to make ice.
After selecting the Auto Ice Clean mode, water will be automatically poured into the Ice tray
and water supply pipe 3 times (for about 2 minutes) to drain the water.
When selecting the ice maker cleaning mode, make sure the Water Connection system is
installed correctly (Page 10 ~ Page 17).
1 Pull out the Ice box, remove all ice cubes from the Ice box (after the ice cubes are fully
formed), and then install the Ice box back.
2 Check the Water Connection system is installed correctly and the water supply valve is
opened.
3 Select the Auto Ice Clean mode (Page 32).
• At the same time, the refrigerator will sound a notification and begin to clean the ice
maker.
• During the cleaning process, the sound cannot be turned off.
• After the beeping sound to inform the completion of the cleaning process, the icon of the
Auto Ice Clean mode on the Operation Panel will turn off, the ice maker cleaning process
will end and the Auto Ice making will be started.
4 Pull out the Ice box from the Freezer compartment, throw away the water in the Ice box
and wipe the water off.
If you do not clean all water on the Ice box, the Ice box may be damaged.
40
How to clean the Ice Maker