Panasonic NR-CW530H Operating Instructions Manual page 13

Step 4: Decide the position to fix the Water Filter.
Determine the length of tubing that can be connected from the fixing position of
Water Filter to the location of water supply, it's called "Tube A" (Refer to Figure 2).
Cutting tube surface should be flat and perpendicular with the length of tubing to
prevent water leaks.
※ Before cutting
Water Filter after connected with
200 mm Tube and Dual Check Valve.
Fix the position of Water Filter.
※ After cutting
Figure 2: Decide position of Water Filter and cutting "Tube A" to connect Dual Check Valve
4 m white Tube
Tube A - Cutting from 4 m white Tube of Dual
Check Valve Assembly Block to connect Dual
Check Valve with water supply.
with water supply.
13