Table of Contents
Advertisement
6. Storage
6-1. Actions before storage
6-1-1 Actions before storing the probe
When the probe will not be used for an extended period of time, perform the procedures described in
section 5 "Cleaning, disinfection and sterilization" and then store it in its storage case.
6-1-2 Actions before storing the puncture guide tube
Clean, disinfect and sterilize the puncture guide tube and store it in the sterilized storage tray.
Puncture guide tube
Puncture guide tube storage tray
Warning
Store it in a sterilized storage tray.
If the puncture guide tube is stored in an unsterilized storage tray, the puncture guide tube can
become contaminated and cause an infection.
Caution
Be sure to close the clip while it is not being used.
When holding clip is left open for a long time, the spring may loose force or even break.
6-2. Environmental conditions for storage
For details about the storage environmental conditions, see section 2-5-2 "Storage environmental conditions".
-49-
MN1-5029 Rev.22
Advertisement
Table of Contents
