Lexmark 22W0020 User Manual page 50

3
Make sure the cartridge carrier lid is closed.
4
Close the access cover.
5
Press .
Cartridge Error
1
Remove the print cartridge.
2
Disconnect the power supply cord from the electrical outlet.
3
Reconnect the power supply cord to the electrical outlet.
4
If the button is not lit, press
5
Reinsert the cartridge.
6
If the cartridge error returns, install a new cartridge. For more information, see "Installing
the print cartridge" in the "Maintaining the printer" chapter of the User's Guide on the CD.
Cartridge missing
The print cartridge is missing or is not installed properly. For more information, see "Installing
the print cartridge" In the "Maintaining the printer" chapter of the User's Guide on the CD.
Cover open
Make sure that the access cover is closed.
Invalid Device
The camera you connected to the printer is not communicating using PictBridge.
1
Disconnect the camera from the printer.
2
Check to see if the camera is PictBridge-enabled. For more information, see the camera
documentation.
Invalid Image File
The memory card or flash drive you inserted is empty or contains files that cannot be read by
the printer.
Use another memory card or flash drive. For more information, see "Inserting a memory card"
on page 21 or "Inserting a flash drive" on page 23.
.
50