Lexmark 22W0020 User Manual page 29

12
If you want to adjust the print settings:
a
Press .
b
Make your selections.
c
Press to save your selections, and then go back to the Print Preview screen.
13
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your
fingers or sharp objects. For best results, remove each printed sheet individually from the
paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying,
or storing.
Printing photos by range
Use these instructions to select the first and last photos in a range to be printed.
1
Load photo paper with the glossy or printable side facing you. (If you are not sure which
side is the printable side, see the instructions that came with the paper.) For more
information, see "Loading paper" on page 20.
2
Insert a memory card or flash drive. For more information, see "Inserting a memory card"
on page 21 or "Inserting a flash drive" on page 23.
3
Press or repeatedly until Print Photos appears on the display.
4
Press .
5
Press or
6
Press .
7
Press to continue.
8
Press or to navigate to the first photo in the range to be printed.
9
Press .
10
Press or to navigate to the last photo in the range to be printed.
11
Press .
12
Press or
per photo.
13
Press .
repeatedly until Print Photo Range is selected.
to select a photo size and paper size, and the number of copies to print
29