Connecting Other Computers On The Same Subnet To The Printer - Lexmark Z65n User Manual

4
From the Printer Selection screen, select the remote printer from the
list.
5
Click Select to continue the printer software installation.
6
Follow the steps for your operating system:
Mac OS 8.6
to 9.2 Mac OS X version 10.0.3 to 10.1
1
When the
printer
software
2
prompts you,
follow the
directions on
the screen to
install and
3
align the
4
cartridges.
5
7
From the Printer Setup is Complete screen, click Test Page to print a
test page on the network printer.
8
Click Finished to complete the printer software installation.
Connecting other computers on the same subnet to
the printer
1
Make sure you have successfully completed the steps in "Configuring
a network printer (Macintosh)" on page 14 or "Manually configuring a
single unconfigured printer" on page 17 to set up your printer on the
first network computer.
2
Complete the following set of steps for each network computer you
want to print to your printer.
a
Insert the printer software CD into the CD-ROM drive of one of the
network computers. If you are using Mac OS X version 10.0.3 to
10.1, double-click the installer icon when the CD contents are
displayed.
From the Printer Selection screen, click Open Print Center.
The Printer List appears.
If your printer is listed, continue with step 3.
If your printer is not listed, click Add Printer, and then select
Lexmark Inkjet Networking from the pop-up menu. Select your
printer from the list, and then click Add.
Click the red close button.
From the Printer Selection screen, click Continue.
Follow the directions on the screen to install and align the
cartridges.
21