Viewing Network Printer Settings; Finding Unlisted Printers - Lexmark Z65n User Manual

b
When the Lexmark printer software installation screen appears,
click Install and Agree. Since your printer is already configured for
the network, software installation should automatically finish.
Note: If more than one available configured printer is found, the
c
From the Printer Setup is Complete screen, click Test Page to print
a test page on the network printer.
d
Click Finished to complete the printer software installation.

Viewing network printer settings

After the software is installed on your network computer, you can use it to:
•
Find the Printer Name, IP address, and MAC address.
•
Change IP address information.
•
Check printer status information, such as ink levels.
For help, see "Using the software to meet your printing needs" on page 4.

Finding unlisted printers

Your printer may not appear in the list of available printers on the Printer
Selection screen because:
•
You may have a printer hardware problem. Perform the following
hardware checks. Refer to the setup sheet for help.
–
Make sure all cables to the network computer, printer, networking
hub, or network wall connection are secure.
–
Make sure the power supplies are properly connected and that all
hardware is turned on.
•
You may be trying to install a printer located on a remote subnet
instead of your local subnet. See "Adding a remote network printer" on
page 20.
You can check for updated printer documentation on our Web site at
www.lexmark.com/publications. Look for Lexmark Z65n printer information.
Printer Selection screen appears. Select your printer from
the list, and then click Select to continue the printer
software installation.
22