251 Paper Jam - Lexmark E360dtn Supplementary Manual

235 paper jam
A duplex print job was sent to the printer using a size of paper not
supported for duplex printing. A sheet is jammed in the standard
exit bin.
1
To remove the jam, gently pull the jammed sheet out of the
standard exit bin.
2
Press .
242 paper jam
1
Remove the optional tray from the printer.
2
Remove the jam.
3
Insert the optional tray.
4
Press .

251 paper jam

A sheet of paper or specialty media failed to feed completely from
the multipurpose feeder. Part of it may be still visible. If it is visible,
gently pull the jammed sheet from the front of the multipurpose
feeder.
5
If the sheet is not visible, complete the following steps:
1
Open the front door, and then remove the unit.
2
Lift the flap at the front of the printer, and then remove any
jammed sheets of paper that are short lengths of paper.
3
Align and insert the unit.
4
Close the front door.
5
Press .