Loading The Multipurpose Feeder; Loading The Optional 550-Sheet Tray - Lexmark C534N Quick Reference

7
Align the tray, and insert it.
8
If a different type of paper was loaded than the type previously
loaded in the tray, change the Paper Type setting for the tray
from the control panel. For more information, see "Setting the
Paper Size and Paper Type" on page 3.
Loading the optional 550-sheet
tray
The optional 550-sheet drawer consists of a 550-sheet tray and a
support unit. This tray is loaded in the same way that the standard
tray is loaded. The only differences between the trays are the look
of the guide tabs and the location of the paper size indicators, as
shown in the following illustration. When the 550-sheet tray is
loaded for the first time or when a new size is loaded, remove the
tray completely from the support unit.
1
Width guide tabs
2 Size indicators
3 Length guide tabs
4 Size indicators
Note: If the same paper size is loaded again, the tray does not need
to be completely removed from the support unit. Just remove and
load the paper without adjusting the guides.
2
Loading the multipurpose
feeder
1
Push the multipurpose feeder latch to the right.
2
Pull the multipurpose feeder door down.