Lexmark X940E Technical Reference page 266

Table 4-11: PostScript Emulation Device Parameters (Continued)
Key Type
Device Parameters for the Communication Device %TokenTalk%, %TokenTalkA%, %TokenTalkB%, %TokenTalkC%,
%TokenTalkD%
(%TokenTalk_NV% and %TokenTalk_Pending% contain the same parameters)
Address string
Bridging name
DelayedOutputClose Boolean
Enabled Boolean
Filtering name
HasNames Boolean
Interpreter name
NodeID integer
On Boolean
PCLSmartSwitch Boolean
PortLocation string
Definition
(Read-only)
(Read-only) Adaptive
Selects how the printer manages the port at the end of each print job. Supported values
are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
(Read-only)
Supported values are:
True
False
Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
(Read-only) Always returns False.
(Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
(Read-only)
Designates if the communication channel is On and able to receive and send data.
Supported values are:
True Data is sent and processed.
False Data is lost.
Supported values are:
True PCL SmartSwitch is On.
False PCL SmartSwitch is Off.
For more information, see "Using SmartSwitch" on page 2-1.
(Read-only) Designates the physical location of the port related to the parameter set.
Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
4-80
PostScript