Lexmark X940E Technical Reference page 132

Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable
LPRINTQUALITY
LPUNCH
LREAROUTBINNAME
LREPEATPRINTLIMIT
(DEFAULT only)
LRESET
LRESOURCESAVE
(DEFAULT only)
LRIGHTMARGINOFFSET
LSCREENING
LSEPARATORSHEETS
LSEPARATORSOURCE
Function Selections
Print Quality QUICKPRINT, NORMAL, PRESENTATION,
Mode GRAPHICS, IMAGES, 1200IMAGEQ, INKSAVER,
NORMAL, BEST
Hole Punch ON, OFF
Rear Output Bin "name"
Name
name is a variable that allows for custom naming of
optional output bins. The text string is truncated to 24
characters.
When queried, the quotes are not returned around
the string name. The default name is returned unless
you have specified a custom name.
Print and Hold 0 to 50 jobs
Repeat Print
Specifies the number of Repeat Print jobs that can be
Job Limit
held in printer memory.
If the Repeat Print Job Limit setting is not equal to 0,
a DINQUIRE or INQUIRE returns the numerical
setting for LREPEATPRINTLIMIT. If Repeat Print Job
Limit setting is set to Disabled, a DINQUIRE or
INQUIRE returns 0.
Reset Control ON, OFF
When the LRESET variable is set to ON, RESET
PRINTER is available in the JOB MENU when the
printer is in the Busy or Waiting state. This is true for
most printers with a printer control panel.
If this variable is set to OFF, RESET PRINTER is not
available.
Resource Save ON, OFF
Right Margin -10 to 10
Offset
Color COLORGRADE, IMAGESONLY, IET
Screening
Selections
Indicates where NONE, BETWEENCOPIES, BETWEENJOBS,
separator BETWEENPAGES
sheets are
placed within
the print job
Indicates which TRAY1, TRAY2, TRAY3, TRAY4, TRAY5, FEEDER,
source contains MPFEEDER, MANUALPAPER, MANUALENVELOPE
the separator
sheets
3-36
Factory Default
NORMAL
OFF
REAROUTBIN
5
ON
OFF
0
COLORGRADE
NONE
TRAY1
PJL