Hardware Kit Contents - Invacare Matrx FSMH TRD0238 User Manual

TRD0238- Fixed Space Saver Kit Installation (CE (europe)-rev 4.0_ International_Layout 1 21/12/2011 10:00 AM Page 3

2.0 Hardware Kit Contents

2.1 Cane Clamp Kit
(left clamp assembly shown)
Figure 1.0 above provides an overview of the Space Saver Cane Clamp Kit for
mounting our MaTRx back cushions onto the back canes of a wheelchair (left clamp
assembly is shown). Each Hardware Kit includes extra mounting hardware (i.e.;
screws/spacers/washers) to allow proper centering of the MaTRx back between the back
canes and mounting plates.
screw
plate
/
Hardware
mounting
plate
depth/recline
adjust screws
spacer
cane
clamps
Figure 1.0
cane adapters
available for:
7/8" (22mm)
and/or
3/4" (19mm)
backcanes
set
screw
3