Print Troubleshooting - Lexmark X6570 User Manual

Resetting an internal wireless print server to factory default settings
You may need to select a different wireless network during the installation process.
1
Press Settings.
2
Press or repeatedly until Network Setup appears.
3
Press .
4
Press or repeatedly until Wireless Setup appears.
5
Press .
6
Press or repeatedly until Reset Network Adapter to Factory Default appears.
7
Press .
The following message appears: This will reset all wireless network settings. Are you
sure?
8
Press or repeatedly until Yes appears.
9
Press .
Clearing wireless settings appears.
Notes:
•
It may take 30-60 seconds for the settings to be cleared.
•
The Wi-Fi indicator light will turn to orange.
Related topics:
•
"Using the control panel" on page 109

Print troubleshooting

Improving print quality
These are possible solutions. Try one or more of the following:
Check paper
•
Use the appropriate paper for the document. If you are printing photos or other high-quality images, for best
results use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark Premium Photo
Paper. Your print cartridges are not compatible with this type of paper.
•
Use a paper that is a heavier weight or bright white.
Check print cartridges
If the document still does not have the print quality you want, follow these steps:
1
Align the print cartridges. For more information, see "Aligning print cartridges" on page 135.
If print quality has not improved, continue to step 2.
2
Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge nozzles" on
page 136.
If print quality has not improved, continue to step 3.
Troubleshooting
162