Safety Instructions For Electric Drives And Controls; Definitions Of Terms - Bosch rexroth NYCe 4000 Hardware Manual

NYCe 4000 Multi-axis motion control system Hardware Sys‐
tem Manual
2

Safety Instructions for Electric Drives and Controls

2.1

Definitions of Terms

Application Documentation
Component
Control System
Device
Drive System
Electrical Equipment
Installation
Machine
Manufacturer
Product
Project Planning Manual
Qualified Persons
The entire documentation used to inform the user of the product about the
use and safety-relevant features for configuring, integrating, installing,
mounting, commissioning,
decommissioning the product. The following terms are also used for this kind
of documentation: User Guide, Operation Manual, Commissioning Manual,
Instruction Manual, Project Planning Manual, Application Manual, etc.
Combination of elements with a specified function, which are part of a piece
of equipment, device or system. Components of a drive and control system
are, for example, supply units, drive controllers, mains choke, mains filter,
motors, cables, etc.
Several interconnected control components placed on the market as a single
functional unit.
Finished product with a defined function, intended for users and placed on
the market as an individual piece of merchandise.
A group of components consisting of electric motor(s), motor encoder(s) and
cable(s), supply units and drive controllers, as well as possible auxiliary and
additional components, such as mains filter, mains choke, etc.
Objects used to generate, convert, transmit, distribute or apply electrical
energy, such as machines, transformers, switching devices, cables, lines,
power-consuming devices, circuit board assemblies, plug-in units, control
cabinets, etc.
Several devices or systems interconnected for a defined purpose and on a
defined site which, however, are not intended to be placed on the market as
a single functional unit.
Entirety of interconnected parts or units at least one of which is movable.
Thus, a machine consists of the appropriate machine drive elements, as well
as control and power circuits, which have been assembled for a specific
application. A machine is, for example, intended for processing, treatment,
movement or packaging of a material. The term "machine"" also covers a
combination of machines which are arranged and controlled in such a way
that they function as a unified whole.
Individual or legal entity bearing responsibility for the design and manufacture
of a product which is placed on the market in the individual's or legal entity's
name. The manufacturer can use finished products, finished parts or finished
elements, or contract out work to subcontractors. However, the manufacturer
must always have overall control and possess the required authority to take
responsibility for the product.
Produced device, component, part, system, software, firmware, among other
things.
Part of the application documentation used to support the dimensioning and
planning of systems, machines or installations.
In terms of this application documentation, qualified persons are those
persons who are familiar with the installation, mounting, commissioning and
operation of the components of the drive and control system, as well as with
the hazards this implies, and who possess the qualifications their work
requires. To comply with these qualifications, it is necessary, among other
things,
Safety Instructions for Electric Drives and Controls
operating, maintaining,
R911337671_Edition 18 Bosch Rexroth AG
7/233
repairing and