Explanation Of Signal Words And The Safety Alert Symbol - Bosch rexroth NYCe 4000 Hardware Manual

8/233
Safety Instructions for Electric Drives and Controls
2.2

Explanation of Signal Words and the Safety Alert Symbol

Bosch Rexroth AG R911337671_Edition 18
● to be trained, instructed or authorized to switch electric circuits and
devices safely on and off, to ground them and to mark them,
● to be trained or instructed to maintain and use adequate safety
equipment,
● to attend a course of instruction in first aid.
A person installing, commissioning or using a product which has been placed
User
on the market.
The Safety Instructions in the available application documentation contain
specific signal words (DANGER, WARNING, CAUTION or NOTICE) and,
where required,
ANSI Z535.6-2011).
Fig. 2-1: Example of a Safety Instruction
The signal word is meant to draw the reader's attention to the safety
instruction and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which
precedes the signal words DANGER, WARNING and CAUTION, is used to
alert the reader to personal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
NYCe 4000 Multi-axis motion control system Hardware Sys‐
a safety alert symbol
tem Manual
(in accordance with