General Safety Instructions - Bosch Rexroth CS351 Manual

Hide thumbs Also See for Rexroth CS351:
Table of Contents

Advertisement

58/108
Bosch Rexroth AG

General safety instructions

2
General safety instruc-
tions
The Compact System has been manufac-
tured according to the accepted rules of cur-
rent technology. There is, however, still a
danger of personal injury or damage to equip-
ment if the following general safety instruc-
tions and the warnings before the steps con-
tained in these instructions are not complied
with.
• Read these instructions completely and
thoroughly before working with the Com-
pact System.
• Keep these instructions in a location
where they are accessible to all users at
all times.
• Always include the operating instructions
when you pass the Compact System on to
third parties.
Intended use
The product described in this documentation
is part of the control and power electronics
for Rexroth tightening systems and is in-
tended for the industrial application of tight-
ening processes exclusively in conjunction
with other products. Only use the product
with the corresponding connecting cables.
The product is intended for industrial use,
and not for domestic applications.
NOTE
The Compact System CS351/CC-
CS351 is not designed to be directly
connected to the public low-voltage po-
wer supply, it is only intended for use in
industrial environments (emission
class A).
CS351 | 3609929B45/2014-09
Observe the operating conditions and perfor-
mance limits specified in the technical data.
Proper use includes having read and under-
stood these instructions, particularly chapter
2 "General safety instructions".
Only use the Compact System CS351 in
conjunction with a Rexroth ErgoSpin/CC-Er-
goSpin hand-held nutrunner or tightening
spindles to tighten and loosen bolts and nuts.
Only use the Compact System CC-CS351 in
conjunction with a Rexroth CC-ErgoSpin
hand-held nutrunner or tightening spindles to
tighten and loosen bolts and nuts.
The integrated logic is not permitted for
safety-critical applications. Safety-critical ap-
plications are all applications that may result
in personal injury or property damage.
Improper use
Any use of the Compact System other than
that described in the section "Intended use"
is considered improper.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rexroth cc-cs351

Table of Contents