Intel Optane Memory H10 With Solid State Storage (Optional); External Ports - Dell OptiPlex 7090 Setup And Specifications

Table 6. Memory configuration matrix (continued)
Configuration
64 GB DDR4
Intel Optane Memory H10 with Solid State Storage
(optional)
Intel Optane Memory technology utilizes 3D XPoint memory technology and functions as a non-volatile storage cache/
accelerator and/or storage device depending on the Intel Optane Memory installed in your computer.
Intel Optane Memory H10 with Solid State Storage functions as both a non-volatile storage cache/accelerator (enabling
enhanced read/write speeds for hard-drive storage) and a solid-state storage solution. It neither replaces nor adds to the
memory (RAM) installed on your computer.
Table 7. Intel Optane Memory H10 with Solid State Storage specifications
Description
Interface
Connector
Form factor
Capacity (Intel Optane memory)
Capacity (solid-state storage)
NOTE: Intel Optane Memory H10 with Solid State Storage is supported on computers that meet the following requirements:
th
● 9 Generation or higher Intel Core i3/i5/i7 processors
● Windows 10 64-bit version or higher (Anniversary Update)
● Intel Rapid Storage Technology driver version 15.9.1.1018 or higher

External ports

Table 8. External ports-Integrated
Description
Network port/slots
USB ports
Audio port
Slot
DIMM1
32 GB
Values
PCIe 3 x4 NVMe
● One PCIe 3 x2 for Optane memory
● One PCIe 3 x2 for solid-state storage
M.2
2280
Up to 32 GB
Up to 512 GB
Values
Rear
● One RJ45 Ethernet port
● Two knock-out slots for wireless antenna
Front
● One USB 3.2 Gen 2x2 capable Type-C port
● One USB 3.2 Gen 2 port with power share
Rear
● One USB 3.2 Gen 1 port
● One USB 3.2 Gen 1 port with smart power on
● Two USB 3.2 Gen 2 ports
Front
● One Universal audio jack
● One re-tasking Line out/Line in audio port
DIMM2
32 GB
Specifications of OptiPlex 7090 Micro 19