Removing The M.2 2280 Solid-State Drive/Intel Optane Memory Module - Dell OptiPlex 7780 All-In-One Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) to secure the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the cable cover (optional).
4. Install the stand.
5. Follow the procedure in
Removing the M.2 2280 solid-state drive/Intel Optane
memory module
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the cable cover
4. Remove the back cover.
5. Remove the system-board
About this task
The following image provides a visual representation of the M.2 2280 solid-state drive/Intel Optane memory module removal procedure.
shield.
After working inside your computer.
Before working inside your
(optional).
shield.
computer.
Removing and installing components 31