Texas Instruments TI-83 Manual page 22

Graphing calculator, manual to accompany precalculus graphing and data analysis

Hide thumbs Also See for TI-83:

Move the blinking cursor to On and press ENTER. Leave the Type where it is above (if

you have a different type selected, use the arrows to highlight the same icon as above and

press ENTER). Your Xlist should be L1 and the Ylist should be L2. (If they are not, use

the arrows to move the cursor and change them. L1 is a 2

L1 type 2

1.) The mark can be any of the three, but I find the box to be easiest to read.

We are now ready to graph the scatter diagram.

Press ZOOM.

You should see the following on your screen:

Now scroll down (or up) until you

reach option 9: ZoomStat

Press ENTER and, if everything goes according to plan, you will obtain your scatter

diagram. NOTE: We could have also obtained ZoomStat by pressing 9 in the ZOOM

menu.

function above 1, so to get

ZOOM

1 is L1