Lexmark OptraImage 433 Setup Manual page 71

Lexmark optraimage 433: setup guide
Hide thumbs Also See for OptraImage 433:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Telecom Warning
Warning!
No '111' or other calls can
be made from this device during a main
power failure.
Telecommunications
OptraImage Setup Guide
New Zealand
Notice
South Africa
Notice
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty. Above
all, it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a different
make or model., nor does it imply that any product is compatible with all
of Telecom's network services.
This equipment may provide for the effective hand-over of a call to
another device connected to the same line.
Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the equipment (PC) associated with this
device. In order to operate within the limits for compliance with
Telecom's Specifications, the associated equipment shall be set to
ensure that calls are answered between 3 and 30 seconds of receipt of
ringing.
If a charge for local calls is unacceptable, the "Dial" button should NOT
be used for local calls.
Only the 7-digits of the local number should be dialed from your
telephone. DO NOT dial the area code digit or "0" prefix.
This modem must be used in conjunction with an approved surge
protection device when connected to the PSTN network.
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optraimage 443

Table of Contents