Table of Contents
Advertisement
STYLO-BD
1b) position the gearmotor anchoring bracket and the slide rail following the measurements shown in the drawing.
56
4 x ø 8,5
80
Drill and thread the holes using an M8 male piece or use Ø 11 mm threaded inserts or any suitable materials for the rail to hold.
Note: the illustrations are mere examples, it is up to the installer to choose the most suitable solution depending on gate-leaf type
and thickness.
Position the slide rail in the holes and secure it using threaded cylinder head screws.
3 x M9
50
180
180
180
640
➊
➊
50
➌
➋
➊
➊
➋
➋
Advertisement
Table of Contents
