After Use; Cleaning And User Maintenance - Oster BLSTPBRG Instruction Manual

C A RING FO R AN D MA IN TA IN I NG

AFTER USE:

1. Lift the jar straight up from the base, remove the lid and empty
the jar.
2. If necessary, use a rubber spatula to scrape foods away from
the sides of the jar.
IMPORTANT: UNPLUG BEFORE CLEANING.

CLEANING AND USER MAINTENANCE

The blade is sharp! Gently remove it.
Release the blade from the bottom of the jar by turning the threaded jar bottom
counterclockwise to the left.
The jar lid, jar lid filler cap and blade are dishwasher safe. Wash them on the top rack of
the dishwasher. Place sealing ring into bottom basket of dishwasher. You can also wash
the parts in warm, soapy water. Rinse well and dry. Wipe the base with a soft, damp cloth
to clean. Never submerge the motor base in any liquid. Check the parts as you put them
back together.
IMPORTANT: DO NOT IMMERSE THE BLENDER BASE IN WATER OR ANY OTHER LIQUIDS.
This appliance has no user serviceable parts. Any servicing beyond that described in the
Cleaning Section should be performed by an Authorized Service Representative only.
See warranty available online.
EASY CLEAN
Pour 3 cups of warm water in the blender jar. Add 1 – 2 drops of liquid dishwashing
detergent. Blend detergent for 10 –15 seconds. Empty jar of soapy water into sink. Rinse
jar thoroughly with clean water.
NOTE: Easy Clean is not a substitute for regular cleaning described above. It is
especially important to disassemble and thoroughly clean your blender when processing
food.
Reassemble the blender for storage. Leave the lid open a gap so no odors are retained.
WARNING: Never put the jar, or any other parts, in a microwave oven. Never store foods
or drinks in the jar.
BLSTPBRG_21EM2.indd 7 BLSTPBRG_21EM2.indd 7
YOUR O S TE R
STORING
- 7 -
B L EN D E R
®
7/21/21 12:43 7/21/21 12:43