Oster BLSTPBRG Instruction Manual page 6

ASSEMBLING THE JAR
1. Turn jar upside down so the small opening is at the top. (Figure 1)
2. Place Blade into Threaded Jar Bottom (Figure 2).
3. Place sealing ring over blade assembly. Carefully press and tuck sealing ring into
locking groove (Figure 3).
4. Ensure the locking sealing ring is fully and evenly tucked in place and holding the
blade assembly to the threaded jar bottom. For correct assembly see (Figure 4).
5. Place blade into jar. (Figure 5)
6. Place threaded jar bottom over blade and turn clockwise to tighten. (Figure 6)
7. Place jar assembly onto base. (Figure 7)
8. Place ingredients into jar.
9. Place lid with filler cap on jar.
10. Plug the power cord into a standard household outlet of the same voltage as the one
indicated in the rating plate of your blender. You are now ready to begin using your
blender!
Figure 1
Figure 5
BLSTPBRG_21EM2.indd 5 BLSTPBRG_21EM2.indd 5
Figure 2 Figure 3
Figure 6 Figure 7
-5 -
Incorrect
Correct!
Figure 4
7/21/21 12:43 7/21/21 12:43