Fuel Tank Cap - Yamaha R1 Owner's Manual

Instrument and control functions
amount of rear wheel braking force to
1
be applied by the UBS is based on ve-
hicle attitude and lean angle. However,
2
operating only the brake pedal will not
generate any brake pressure at the
front brake.
3
For full braking performance, apply
both the brake lever and brake pedal si-
4
multaneously.
When both the brake lever and the
brake pedal are applied simultaneous-
5
ly, the UBS will control the distribution
of braking force between the two
6
wheels.
TIP
7

The UBS does not function until
the vehicle starts moving.
8

After coming to a stop while apply-
ing the brake lever, the UBS is still
9
enabled. As further squeezing of
the brake lever will not increase
the braking power of the rear
10
brake, apply the rear brake should
further braking power be neces-
11
sary (such as when parking on a
slope).
The UBS disables after the brake
12
lever is released.
When the vehicle starts moving,
the UBS is re-enabled.
5-33

Fuel tank cap

2
1. Fuel tank cap lock cover
2. Unlock.
To open the fuel tank cap
Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.
To close the fuel tank cap
1. Push the fuel tank cap into position
with the key inserted in the lock.
2. Turn the key counterclockwise to
the original position, remove it, and
then close the lock cover.
EAU13075
1