Yamaha R1 Owner's Manual page 28

Instrument and control functions
1
ABS warning light "
In normal operation, the ABS warning
light comes on when the key is turned
2
to "ON", and goes off after traveling at a
speed of 10 km/h (6 mi/h) or higher.
3
If the warning light does not work as de-
scribed above, or if the warning light
comes on while riding, the ABS and
4
UBS may not work correctly. Have a
Yamaha dealer check the vehicle as
5
soon as possible. (See "Brake system"
on page 5-32 for an explanation of ABS
6
and UBS.)
WARNING
7
If the ABS warning light does not go
off after traveling at a speed of 10
8
km/h (6 mi/h) or higher, or if the
warning light comes on or flashes
9
while riding, the brake system re-
verts to conventional braking. If ei-
ther of the above occurs, or if the
10
warning light does not come on at
all, use extra caution to avoid possi-
11
ble wheel lock during emergency
braking. Have a Yamaha dealer
12
check the brake system and electri-
cal circuits as soon as possible.
EAU66501
" Shift timing indicator light
ABS
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next higher
gear. (See page 5-24.)
The electrical circuit of the indicator
light can be checked by turning the key
to ON. The indicator light should come
on for a few seconds, and then go off.
If the indicator light does not come on
initially when the key is turned to ON, or
if the indicator light remains on, have a
EWA16041 Yamaha dealer check the electrical cir-
cuit.
Immobilizer system indicator light
" "
When the key is turned to "OFF" and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The electrical circuit of the indicator
light can be checked by turning the key
EAU67431 to ON. The indicator light should come
on for a few seconds, and then go off. If
the indicator light does not operate as
described above, have a Yamaha deal-
er check the vehicle.
If a problem is detected in the immobi-
lizer system, the immobilizer system in-
dicator light will flash and the display
will indicate an error code. (See "Error
mode" on page 5-14.)
Stability control indicator light "SC"
This indicator light comes on when the
TCS, SCS, or LIF systems have en-
gaged. It will also come on if the TCS is
set to "OFF" or if the TCS system be-
comes disabled while riding.
EAU66901
The electrical circuit of the light can be
checked by turning the key to "ON".
The light should come on for a few sec-
onds and then go off. If the light does
not come on initially when the key is
turned to "ON", or if the light remains
on, have a Yamaha dealer check the
vehicle.
5-7
EAU65980