Yamaha R1 Owner's Manual page 35

Error mode "Err"
1 2 3 4
90 90
1000 r/min
×
1. SCU trouble warning " "
2. SCU error code
3. Engine trouble warning "
4. ECU error code
5. Error mode warning "Err"
When an error is detected, the top por-
tion of the main screen will switch to er-
ror mode. The following error-related
warning icons and error codes will then
be viewable.

SCU trouble warning icon

SCU error code

Engine trouble warning icon

ECU error code
SCU trouble warning "
The SCU trouble warning icon appears
if a problem is detected by the suspen-
sion control unit and an SCU error code
will be shown. Note the number and
5 have a Yamaha dealer check the vehi-
cle.
Engine trouble warning "
E r r
The engine trouble warning icon ap-
pears if a problem is detected by the
engine control unit and an ECU error
code will be shown. Note the number
and have a Yamaha dealer check the
vehicle.
"
TIP
If the display indicates error code 52, or
if you have trouble starting the engine
with a standard key, this could be
caused by transponder interference. If
this occurs, try the following.
1. Make sure there are no other im-
mobilizer keys, or other devices
which transmit electrical signals,
close to the main switch.
2. Use the code re-registering key to
start the engine.
3. If the engine starts, turn it off, and
"
try starting the engine with the
standard keys.
Instrument and control functions
"
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
5-14
4. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
1
2
3
ECA11591
4
5
6
7
8
9
10
11
12