Yamaha R1 Owner's Manual page 40

Instrument and control functions
mark to fine tune the ERS mode
1
settings.
2
ERS (YZF-R1M)
There are three automatic setting
modes; A-1, A-2, and A-3. A-3 is fixed
3
and cannot be adjusted. A-1 and A-2
can be adjusted to within a -5 to +5 off-
4
set of their factory preset settings.
There are three manual setting modes;
M-1, M-2, and M-3. When a manual
5
mode is selected, the SCU does not ac-
tively adjust the suspension compres-
6
sion and rebound damping forces.
Manual mode suspension settings are
7
adjustable to 32 levels.
TIP
8

A-1 and M-1 are preset for track
use with racing slick tires.

9
A-2 and M-2 are preset for track
use with street tires.

A-3 and M-3 are preset for street
10
use with street tires.

Spring preload is manually adjust-
11
ed. (See pages 5-40 and 5-42.)
12
To adjust the ERS mode settings
YRC Setting
km/h
A 1 1 1 1 1
B 2 2 2 2 2
C 3 3 3
OFF OFF
D 4 4
OFF OFF
5
YRC YRC PWR TCS SCS LCS QSS PWR TCS SCS LCS QSS LIF LIF
1. To ERS menu
1. Select the " " mark located to the
right of ERS.
2. The display will change to the front
and rear suspension
screen and the ERS mode selec-
tion box "SETTING" is highlighted.
Short push the wheel switch to en-
ter the box and select the ERS
mode A-1, A-2, M-1, M-2, M-3 that
you want to adjust.
5-19
12 : 00
km/h
A-2
A - 1
1
A-3
2 A - 2
M-1
3 A - 3
M-2
M - 1
M-3
M - 2
SETTING
ERS
1
1
1. ERS mode selection box "SETTING"
2. Front compression damping force
3. Front rebound damping force
4. Rear compression damping force
5. Rear rebound damping force
6. Factory preset level
setting
7. Current level setting
8. Offset level
3. Select the suspension item, Fr
COM, Fr REB, Rr COM, Rr REB,
that you want to adjust.
TIP

To decrease the damping force
and soften the suspension, in-
crease the setting level.

To increase the damping force and
harden the suspension, decrease
the setting level.
8
YRC Setting 12:00
7
( ( + + 0 ) ) 16 ( ( + + 0 ) ) 25 ( ( + + 0 ) ) 13 ( ( - - 5 ) ) 22
6
Fr COM Fr REB Rr COM Rr REB
2 3 4 5