Cleaning The Glass Cooktop - GE JS630 Owner's Manual

Cleaning the Glass Cooktop

Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
Cleaner on the glass cooktop. Other creams may not
be as effective.
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it
with CERAMA BRYTE
This helps protect the top and makes cleanup easier.
Cleaner will help keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
CERAMA BRYTE ®
to the cooktop.
Burned-On Residue
NOTE:
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of CERAMA BRYTE
Cooktop Cleaner on the entire burned residue area.
for Ceramic Cooktops, rub the residue area, applying
pressure as needed.
4. If any residue remains, repeat the steps listed above
as needed.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of CERAMA BRYTE
Cleaning Pad to remove any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE ® Ceramic Cooktop Cleaner and a paper towel.
Metal Marks and Scratches
1. Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface.
These marks are removable using the CERAMA
BRYTE ® Ceramic Cooktop Cleaner with the CERAMA
BRYTE ® Cleaning Pad for Ceramic Cooktops.
18
® Ceramic Cooktop
® Ceramic Cooktop Cleaner.
® Ceramic Cooktop
Ceramic Cooktop Cleaner directly
® Ceramic
® Cleaning Pad
® Ceramic Cooktop Cleaner on the
CERAMA BRYTE
Pad for Ceramic Cooktops
to clean the entire cooktop
surface.
towel to remove all cleaning
residue. No need to rinse.
NOTE: It is very important that
until it has been cleaned
thoroughly.
5. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE ® Ceramic Cooktop Cleaner and a paper towel.
Pad for Ceramic Cooktops.
®
The CERAMA BRYTE
recommended supplies are available through our Parts Center.
NOTE:
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately before heating
again or the discoloration may be permanent.
NOTE: Carefully check the bottom of pans for roughness
that would scratch the cooktop.
® Cleaning
Clean your cooktop after each
Ceramic Cooktop Cleaner.
® Cleaning
® Ceramic Cooktop Scraper and all
®
49-80693-3